Shindaiwa 68006-94310 业主指南
3
Before Operation
Children and people who do not
understand this manual must not
use this unit.
Never allow other people or
animals to be near the unit when
starting or operating.
Never touch a rotating cut-off
wheel.
Operate the unit only in a well
ventilated area.
Never operate the unit in a closed
area such as a room, warehouse
or tunnel. Running the unit in
a closed area may cause seri-
ous illness or even death due to
exhaust gas.
Never allow any people or ani-
mals near exhaust gas.
Never inhale exhaust gas.
Never make unauthorized modifi-
cations or alterations to any of the
components of the unit, and never
operate the unit without the wheel
guard or muffler.
This unit is designed for one-man
operation and must be operated
by only one person.
Never operate the unit when you
are tired or under influence of
any substance that could impair
vision, dexterity or judgement.
When operating the unit, always
wear snug-fitting clothing, safety
gloves, safety non-skid footwear,
hearing protection, a dust-proof
mask, a helmet and goggles. Nev-
er wear floppy clothing, shorts,
sandals or accessories that could
become entangled.
A first-time operator should obtain
practical instruction from a dealer
or an experienced user before
using the unit.
Safety Precautions
WARNING!
To minimize the risk of sparks
igniting clothing while operating the
unit, wear clothing made of leather,
wool, tightly-woven cotton, or cotton
treated with flame-retardant.
Never use any cut-off wheel that is
not recommended in this manual.
Do not start or operate the unit un-
less you have a clear work area and
secure footing.
Do not operate the machine for
more than two hours a day in total.
Do not operate it for more than ten
minutes continuously. Due to vibra-
tion, excessive operation may cause
you white finger disease.
Never smoke or use fire near the
unit or its fuel.
Since the muffler and exhaust gas
become very hot, make sure there
are no flammable substances near
the unit.
Never run the unit if you discover a
fuel leak.
Make sure all the components are
in place and the bolts are securely
fastened.
Make sure the cut-off wheel is
securely fastened and is not dam-
aged. Never use a cut-off wheel
with cracks, distortion, or one that is
unbalanced.
Make sure the belt tension is prop-
erly adjusted and the wheel guard,
belt guard and clutch cover are
securely assembled.
Always inspect the front handle, rear
handle and wheel guard before use,
and never use the unit if the parts
are damaged.