Sharper Image SI871 用户手册

Oil from fingers will reduce the germicidal performance of the 

UV-C lamp. If possible, use gloves or handle only by the metal 

area of the lamp. Otherwise, clean the lamp after installing to 

remove fingerprints and oils.
To clean: Wipe the lamp, using a paper towel lightly dampened 

with rubbing alcohol or an ammonia-based cleaner (such as  

Windex brand).
1.   Remove the cover by lifting up on  

the RELEASE-TAB at the bottom of  

the cover and sliding the cover up.

2.   Turn the lamp 

1

/

4

 turn (two “clicks”)  

and slide it from its fixture. Replace  

with a new one of the same type.

3.   Dispose of used fluorescent lamps in  

accordance with local regulations.

17