RTS LMS-325 用户手册
Operation
6
External Connections & Controls
NOTE: The numbers refer to the callouts in Figure 1.
Figure 1.
LMS-325 Connections and Controls
1.
Volume Control
Use this control to simultaneously adjust the speaker
level for both speaker input lines.
Use this control to simultaneously adjust the speaker
level for both speaker input lines.
2.
12-15 VDC Input Jack
The LMS-325 is powered from a Telex
®
Wall Pack
(part number 532006-000). Plug the Wall Pack inot the
12-15 VDC jack and into an AC outlet.
12-15 VDC jack and into an AC outlet.
3.
Balance Control
This control adjusts the relative level of the Input 1and
Input 2 (Channel 1 and Channel 2, respectively). Use a
small flat-blade screwdriver to adjust the
control.
This control adjusts the relative level of the Input 1and
Input 2 (Channel 1 and Channel 2, respectively). Use a
small flat-blade screwdriver to adjust the
control.
4.
Audio Input Jacks
These 1/4” monaural phone jacks can be used to
connect audio inputs from some other line-level
program sources (an auxiliary output from a radio or
tap player for example).
These 1/4” monaural phone jacks can be used to
connect audio inputs from some other line-level
program sources (an auxiliary output from a radio or
tap player for example).
5.
XLR Line Input Connector
This 3-pin female XLR jack can be connected directly
to an RTS™ intercom line. The RTS™ intercom line
may carry Channel 1, Channel 2, or both channels.
This 3-pin female XLR jack can be connected directly
to an RTS™ intercom line. The RTS™ intercom line
may carry Channel 1, Channel 2, or both channels.
12-15 VDC
+
-
2
INPUT 2
LINE LEVEL
TELEX COMMUNICATIONS, INC.
MADE IN USA
LINE
INPUT 1
4
5
1
3
BAL
;;;;;;;;;;;;;;
;;;;;;;;;;;;;;
;;;;;;;;;;;;;;
;;;;;;;;;;;;;;
RTS LMS325 VOLUME