Roland Classic Keyboard C-230 用户手册
35
Additional Convenient Functionality <Advanced Operation>
If necessary, you can erase all settings you have saved inside the C-230 and instead load the settings the C-230 contained when
you first bought it.
you first bought it.
The following procedure will erase all settings you have
made up to this point.
made up to this point.
1.
While holding down the [Function] button, press the
[Chime] button.
[Chime] button.
The [Function] and [Chime] buttons start flashing.
2.
Release the [Function] and [Chime] buttons.
Be sure to proceed with step (3) within ±10 seconds. If
you wait longer, the [Function] and [Chime] buttons go
dark. After that, you need to return to step (1) if you still
want to load the factory settings.
you wait longer, the [Function] and [Chime] buttons go
dark. After that, you need to return to step (1) if you still
want to load the factory settings.
3.
While holding down the lower part of the [SUBBASS
16] tilt tab, press the [Lute] button.
16] tilt tab, press the [Lute] button.
The [Lute] button starts flashing.
4.
Wait until the [Function], [Chime] and [Lute] buttons
go dark.
go dark.
5.
Switch off the C-230, wait a few seconds, then switch it
back on again to use the factory settings.
back on again to use the factory settings.
Loading the factory settings
C-230_e.book Page 35 Tuesday, May 19, 2009 10:22 AM