Roland V-Studio VS-20 用户手册
29
From initial settings to recording
In order to record with the best possible audio quality, adjust the input level so that V-STUDIO 20’s PEAK indicator
slightly lights even during the loudest passages.
slightly lights even during the loudest passages.
With the DIRECT MONITOR knob turned down, turn the SENS knob until you see the red light come on. Then
turn SENS knob down just until the peak light goes off.
turn SENS knob down just until the peak light goes off.
1.
Use the [SENS] knob on the VS-20 Hardware to adjust the input level.
V-STUDIO 20 provides a wide variety of effects.
In this example, we’ll apply a effect to the input signal you perform.
1.
Press the [COSM] button on the VS-20 Hardware.
The VS-20 Hardware's [COSM] button indicator will light, and VS-20 Editor will start up.
fig.FXbin.eps
If the Editor is already open, pressing the COSM button will bypass the effect. To view the Editor simply click on
the VS-20 Editor button in the Windows Taskbar.
the VS-20 Editor button in the Windows Taskbar.
2.
Use PATCH SELECT [<] [>] to select the desired effect patch.
For details on how to edit the effects, refer to VS-20 Editor's online help (PDF).
4. Adjust the level
5. Try out an effect.
VS-20_e.book 29 ページ ２０１０年１月１８日 月曜日 午前９時８分