Roland eBand JS-8 用户手册

30

Turns the  REVERB OFF/ON.

Use this to choose the type of reverb.

AMBI.

Simulates an ambience mic (off-mic, placed at a distance from the sound source) used in 

recording and other applications. Rather than emphasizing the reverberation, this reverb is 

used to produce a sense of openness and depth.

ROOM

Simulates the reverberation in a small room. Provides warm reverberations.

HALL 1

Simulates the reverberation in a concert hall. Provides clear and spacious reverberations.

HALL 2

Simulates the reverberation in a concert hall. Provides mild reverberations.

PLATE

Simulates plate reverberation (a studio effect unit that uses the vibration of a large metal 

plate to produce reverberation). Provides a metallic sound with a distinct upper range.

Adjusts the length (time) of reverberation.

The high cut filter adjusts the amount of high frequencies in the reverb sound. When “FLAT” is selected, the high 

cut filter will have no effect.

This sets the volume level of the effect.

This sets the tempo when RATE parameters such as  DELAY TIME,  PHASER, and  FLANGER are synchro-

nized to the song tempo.

Set  DELAY TIME and RATE to (Whole Note)-(16th Note).

You can also input the tempo by tapping [ SPEED] in time with the beat (TAP function).

This adjusts the character of the guitar tone, ranging from solo tone (-20) to a tone used for backing 

(+20).

Turns the  CHORUS OFF/ON.

Use this to choose the type of chorus.
MONO

This chorus effect outputs the same sound from the left and right channels.

ST 1

This is a stereo chorus effect that adds different chorus sounds to L channel and R channel.

ST 2

This stereo chorus uses spatial synthesis, with the direct sound output in the left channel 

and the effect sound output in the right channel.

MN MLD

This features a more suppressed high end than MONO.

ST1 MLD

This features a more suppressed high end than ST 1.

ST2 MLD

This features a more suppressed high end than ST 2.

This sets the speed of the effect.

When set to BPM, the value of the RATE parameter is set according to the value of the “EFFECT TEMPO” (p. 30) 

specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the 

song.

This sets the richness of the effect.

This sets the volume level of the effect.