Roland DIGITAL SNAKE S-4000D 用户手册

 

Connect one end of the supplied AC power cord to a grounded AC outlet, and the other 
end to the AC INPUT connector to provide power for the S-4000D’s internal power supply. 

To prevent the power cord from being unplugged inadvertently, you should secure the 
power cord in place using the power cord clamp.

 

Once the connections have been completed, turn on power to your various devices in the 
order specified. By turning on devices in the wrong order, you risk causing malfunction 
and/or damage to speakers and other devices.

 

* REAC devices compatible with REAC EMBEDDED POWER may have no power switch. In such cases, 

the power is switched on automatically when the device is connected to the unit.

 

* If you need to turn off the power completely, first turn off the POWER switch, then unplug the 

Use only the supplied power cord 

to prevent damage to the units.

To prevent malfunction and/or 

damage to speakers or other 

devices, always turn down the 

volume, and turn off the power 

on all devices before making any 

connections

Switching off the power to the 

unit also stops the supply of 

power to any REAC devices 

compatible with REAC 

EMBEDDED POWER that are 

connected to the unit.

S-4000D_e.book 9 ページ ２０１０年１０月８日　金曜日　午後１時１分