Roland Ronald Wireless DP90S 用户手册

About the Wireless LAN Function

The wireless LAN function was added in DP90S/DP90 

version 2.00. If the version is earlier than 2.00, download the 

update from the support page (http://www.roland.com/

support/) g Downloads g product name (DP90S/DP90) 
g

 DP90S/DP90 System Program Version 2.00, and update 

your DP90S/DP90.

*  If this supplementary manual was included with a new 

DP90S/DP90 you purchased, your instrument has already 

been updated to version 2.00 or later; you do not need to 

update.

Hold down the [–] and [+] button and turn ON the 

DP90S/DP90.

By inserting the wireless USB Adapter (WNA1100-RL; sold separately) 

into the DP90S/DP90’s USB MEMORY port, you’ll be able to use 

wireless-compatible applications (such as the “Piano Partner” iPad 

app).

Wireless LAN

Wireless LAN

 

‰

Wireless USB Adapter (sold separately: WNA1100-RL)

 

‰

Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3

 

‰

iPad etc.

*1  The wireless LAN access point you use must support WPS. If your 

wireless LAN access point does not support WPS, you can connect 

using the procedure described in “Connecting to a Wireless LAN 

*2  The ability to connect with all kinds of wireless LAN access points 

is not guaranteed.

*3  If you’re unable to connect to the wireless LAN access point, try 

connecting using Ad-Hoc mode (p. 3).

The first time you connect the DP90S/DP90 to a wireless network, 

you’ll need to perform the following procedure (WPS) to join the 

wireless network. 
This procedure is required only the first time. (Once you’ve joined the 

network, this procedure will no longer be necessary.)

This is a standard that makes it easy to make security settings 

when connecting to a wireless LAN access point. We recommend 

that you use WPS when connecting to a wireless LAN access point.

“Proceed?” will appear.

For details on WPS operation of your wireless LAN access point, refer 

to the documentation for your wireless LAN access point.

Once successfully connected, “Success” will appear.

*  If you fail to connect, refer to “Troubleshooting” (p. 4).

*  The device (e.g., iPad) running the app must be connected to the 

same network.

•  The connection data is stored in memory when you perform 

the WPS procedure; the device will automatically connect to the 

wireless network the next time.

•  All connection data will be erased if you perform a factory reset.