Roland Edirol DM-5 用户手册

Function and Connection

fig.03.e

1. HF Driver

* Do not touch the diaphragm.

2. LF Driver

* Do not touch the speaker cone.

3. Bass-reflex Ducts

These are conduits for rich, bass-range reproduction.

4. Power Indicator

Lights when power is on.

5. Digital In Indicator

This lights up when output is received from a connected
digital device or during standby.

* When the connected digital-signal output device is not powered

up, the Digital In indicator does not light up.

6. Heat Sink

This is a heat-radiating plate that dissipates excess heat.

7. Level Control

This adjusts the input level. Turning the control clockwise
increases the sound from the speakers.

8. HF Trim Control

This adjusts the sound quality of the treble range (10 kHz, +/
-3 dB).

9. LF Trim Control

This adjusts the sound quality of the bass range (80 Hz, +/-3
dB).

10. DIGITAL INPUT

Coaxial Input Connector (Digital Input)

This is the digital input connector for coaxial cable.

* It cannot be used for input of analog audio signals (no sound is

produced).

Optical Input Connector (Digital Input)

This is the digital input connector for optic-fiber cable. Use
commercially available optical cable for audio equipment to
make the connection.

Optical-connector Protective Cap

• After removing the protective cap, put in a safe place so

that it doesn’t get lost.

• When not using the optical connector, attach the cap to

keep the connector safe.

• When using the optical connector, be sure that the cap you

removed is placed out of the reach of children. If a child
has accidentally swallowed a cap, see a doctor
immediately.

Digital Input Select Switch

This switch selects Optical or Coaxial. Select the connector
used for the input signal.

Front

6
7
8
9

10
11
12

15
16

Rear