Robert Bosch Home Security System VG4-200 用户手册

VG4 AutoDome Modular Camera System

Pelco On-Screen Menus | en

Bosch Security Systems, Inc.

User’s Manual

F.01U.089.433 | 4.0 | 2008.09

You can program the AutoDome through the Pelco on-screen display (OSD) menus. To access 

the Pelco menus, you must configure the AutoDome for Pelco Mode and invoke the Pelco 

main Setup Menu.

The Pelco main Setup Menu provides access to the programmable AutoDome settings. Some 

menu items are locked and require a system password to use. Menu items marked with an * 

are the default settings.

1.

Press 95-PRESET (press the PRESET button for approximately 2 seconds to open).

2.

Use the joystick to highlight a menu item.

3.

Press either the Focus or the Iris key to open a menu item.

4.

Follow the on-screen instructions at the bottom of the screen.

Exit...
Command Lock:

OFF

Bosch Menu
Camera Setup
PTZ Setup
Edit Password
*FastAddress:

Not Set

Advanced
Software Version
Ack and Reset Alarms
Restore All Settings
Reset All Memory
* = Factory Setting
Focus / Iris: Select

NOTICE! Use Zoom to select the Exit item from anywhere in a menu.

Command Lock 

(locked)

Allows or prohibits accessing locked commands. (If password is 

set, you are prompted to enter the password.

Bosch Menu (locked)

Accesses the full AutoDome configuration menu and all AutoDome 

settings.

Accesses the White Balance and Night Mode camera settings.

Accesses the tours, tour periods, scan speed, edit presets, limit 

stops, recording, and AutoPivot settings.

Edit Password 

(locked)

Changes the password.

FastAddress (locked)

Sets or changes a camera address.