Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Robert Bosch
  4. Home Security System VG4-200
  5. 用户手册

Robert Bosch Home Security System VG4-200 用户手册

下载
页码 共 116
42
en | Advanced Features
VG4 AutoDome Modular Camera System
F.01U.089.433 | 4.0 | 2008.09
User’s Manual
Bosch Security Systems, Inc.
1.
Flash an OSD message (***ALARM 2***) on the monitor.
2.
Stop the AutoPan and move the camera to a saved position (Shot 5) viewing the fence.
3.
Turn on AutoTrack.
4.
Transmit a Bilinx signal to the head end system to trigger an alarm response.
The sequence to program this alarm rule example is as follows:
1.
Wire and set the alarm Input(s).
a.
Wire the motion detector to Input 1.  (This circuit is normally open.)
b.
Wire the gate alarm contact to Input 5.  (This circuit is normally closed.)
2.
From the Inputs Setup menu:
a.
Ensure Input 1 (the motion detector) is set to N.O. (This setting is the default for 
Input 1.)
b.
Ensure Input 5 (the gate contact) is set to N.C.
3.
Set the alarm Outputs from the Outputs Setup menu:
a.
Set Output 5 to OSD.
b.
Set Output 6 to Transmit.
c.
Set Output 7 to Shot 5.
d.
Set Output 8 to AutoTrack.
4.
Set up the Alarm Rule (for this example use Rule 2). Select the alarm Inputs:
a.
From the Rule Setup menu select Rule 2.
b.
Set the first input to Alarm Input 1. (The motion detector.)
c.
Set the second input to Alarm Input 5. (The gate alarm contact.)
5.
Select the alarm Outputs:
a.
Set the first output to OSD.
b.
Set the second output to Shot 5 viewing the fence.
c.
Set the third output to AutoTrack and select Latched.
d.
Set the fourth output to Transmit (a Bilinx signal to the headend).
6.
Enable the alarm Rule:
–
Highlight Enabled and select YES.
Example 3: Advanced Alarm Rule using AutoTrack
The following example explains how to set an alarm rule that moves the camera to a preset 
position and then activates the AutoTrack feature to track an intruder after an alarm is 
triggered. This example uses the Configuration Tool for Imaging Devices (CTFID) software 
tool. Refer to the Configuration Tool for Imaging Devices User Guide, available at 
www.boschsecurity.com.
i
NOTICE! For instruction on wiring alarm and relay connections, see the AutoDome Modular 
Camera System Installation Manual.