Robert Bosch Home Security System VG4-200 用户手册
VG4 AutoDome Modular Camera System
Getting Started | en
3
Bosch Security Systems, Inc.
User’s Manual
F.01U.089.433 | 4.0 | 2008.09
1
Getting Started
Install and wire the AutoDome according to the Bosch AutoDome Modular Camera System
Installation Manual. A typical system includes a keyboard, matrix switcher, monitor, and
appropriate wiring connections. Please refer to the individual product manuals for complete
installation and setup instructions for each of the system components.
1.1
Powering On
When you turn the AutoDome power on there is a ten (10) second pause before the dome
starts its homing phase. During the homing phase the camera pans left and right and tilts up
and down. It also adjusts the lens focus. The entire homing phase lasts approximately 40
seconds and ends with a splash screen.
1.2
Establishing AutoDome Control
The most common ways to interface with the AutoDome are:
–
Using a keyboard and on-screen display (OSD) menus. This method is the most common
and is covered in this manual.
–
Using the AutoDome Configuration Tool software running on a PC with Bilinx or the RS-
232/485 communication protocol. Refer to the CTFID User Guide for instructions.
–
Using a PC-based graphical user interface (GUI) such as the Bosch DiBos 8 software.
Refer to the DiBos 8 User Guide for instructions.
–
Using the Bosch IP Web interface included with the IP Communications Module.
1.2.1
Basic Keyboard Operation
The following tables summarize the basic operations for a standard keyboard and the
functions available to control an AutoDome camera.
Table 1.1
Typical Keyboard Functions
Table 1.2
Typical Keyboard Controls for an AutoDome Camera
Typical
Keyboard
Features
Usage
Function Keys
Selects a specific control setting.
Number Keys
Inputs a number from 0 to 9.
Camera Key
Selects a camera number.
Enter Key
Inputs a selection.
Focus Key
Sets the lens focus or makes a menu selection in OSD mode.
Iris Key
Sets the lens iris setting or makes a menu selection in OSD mode.
Key LEDs
Indicates an active key.
LCD
Displays the current status.
Joystick
Controls a pan/tilt/zoom (PTZ) AutoDome camera.
Dome Operation
How to control
To Pan Side to Side
Move the joystick left or right.
To Tilt Up and Down
Move the joystick forward and back.
To Zoom In
Twist the joystick clockwise.
To Zoom Out
Twist the joystick counterclockwise.