Ricoh IS300e 用户手册

Appendix

174

 

Exceeded Job Delivery Data Max. 

Scanning will be stopped and 

the scanned data will be delet-

ed. 

 

 [Exit] 

Scanning of the first original has failed.

• Confirm the setting in [4.Scan Settings] 

→ 

. If “ Colour:Full Colour 

” is selected, change to another option. “ 
Black and White:Text ” is good for 
scanning most monochrome originals, and 
even “ Black and White:Text/Photo 
” is enough for scanning originals in 2 
colors (e.g. an original containing text 
printed in black and charts drawn in red).

• Confirm the setting in [4.Scan Settings] 

→ 

. Specify a lower resolution, if 

the current setting is unnecessarily high. 
Normally, 200dpi or lower resolution set-
ting is enough for scanning text.

• Set [Compression (Black and White)] in [2.Send 

 to “ On ” when [Scan Type] in 

 is set to one of the “ Black 

and White ” options.
Set [Compression (Gray Scale/Full Colour)] in 
[2.Send Scan Settings]

 to an option that is 

higher than the current setting, when [Scan 
Type]

 in [4.Scan Settings] is set to one of the 

“ Colour ” options.

• Make the value of the following settings 

larger using the Web Status Monitor:

•  [Configuration] 

→ [E-mail Settings] → [E-

 

→ [Max. E-mail Size] when sending 

scan data as an e-mail attachment

•  [Configuration] 

→ [Delivery Settings] → 

 

→ [Job Delivery Data Max. Set-

 when sending scan data using a 

delivery server

•  [Configuration] 

→ [File Send Settings] → 

 

→ [Job Delivery Data Max. Set-

 when sending scan data to a Win-

dows shared folder or an FTP server

 

Exceeded Job Delivery Data Max. 

Send the current scanned data 

or delete to cancel this job.

 

 [ Delete ] [ Send ] 

Scanning of the second or subsequent original 
has failed.

• To send the data up to the previous page 

scanned, press [Send]. After the 

B mark on 

the screen disappears, press the 

{{{{Start}}}} key 

to scan the remaining pages.

• If you press [Delete], scanned data is delet-

ed and the document is not sent. Try scan-
ning with such settings that make data size 
smaller, or perform scanning several times 
to create a number of separate files, each of 
which file size is small enough for a Send 
Scan operation.