RF-Link Technology WRT55AG 用户手册

Dual-Band Wireless A+G Broadband Router 

3.  Write down the Adapter Address as shown on your computer screen (see

Figure E-3).  This is the MAC address for your Ethernet adapter and will
be shown as a series of numbers and letters.  

The MAC address/Adapter Address is what you will use for MAC address
cloning or MAC filtering. 

Write down the IP Address as shown on your computer screen. The exam-
ple in Figure E-3 shows the IP address of your Ethernet adapter as
192.168.1.100. Your computer may show something different.  

1. Click 

Start and Run. In the Open field, enter cmd. Press the Enter key or

click the OK button.

95

Appendix D: Finding the MAC
Address and IP Address for Your

Ethernet Adapter

This section describes how to find the MAC address for your Ethernet adapter
to do either MAC address filtering or MAC address cloning for the Router and
ISP.  You can also find the IP address of your computer’s Ethernet adapter.  The
IP address is used for filtering, forwarding, and DMZ.  Follow the steps in this
appendix to find the MAC address or IP address for your adapter in Windows
95, 98, Me, NT, 2000, and XP. 

1. Click 

on 

Start and Run. In the Open field, enter winipcfg. Then press the

Enter key or the OK button.

2.  When the IP Configuration window appears, select the Ethernet adapter

you are using to connect to the Router via a Category 5 Ethernet network
cable.

94

Note: The MAC address is also called the Adapter
Address.

Instant Wireless

®

Series