Redring CD-RW901SL 用户手册
4
Installing the mains supply
If a mains supply is not already available.
● Install a 13 Amp fused double pole isolating switch with a minimum contact gap of 3mm in
each pole adjacent to where the unit will be fixed.
Removing the front cover
● Remove the screws from the bottom and top edge of the unit (Fig. 3).
● Support the front cover and remove the flow knob (Fig. 4).
● Pull the front cover away from the unit.
● Please note that there is a flying lead and plug freely attached to the front cover.
● Support the front cover and remove the flow knob (Fig. 4).
● Pull the front cover away from the unit.
● Please note that there is a flying lead and plug freely attached to the front cover.
Fig. 3