Radio Shack 49-2534 用户手册
2
+/2146#06"5#('6;"
24'%#76+105"
Before setting up or operating your system, please read all
these safety and operating instructions completely. Retain
instructions for future reference.
these safety and operating instructions completely. Retain
instructions for future reference.
To avoid entanglement, never place the camera in a crib or
playpen.
playpen.
Do not place or mount the camera on any surface or wall
where the camera and its AC adapter cord are within the
reach of a baby or other children.
where the camera and its AC adapter cord are within the
reach of a baby or other children.
Never use the camera or monitor near water. For example,
do not use near a bathtub, washbowl, laundry tub, kitchen
sink, aquarium, or in a wet basement.
do not use near a bathtub, washbowl, laundry tub, kitchen
sink, aquarium, or in a wet basement.
Disconnect the AC adapters from wall outlets during long
periods of non-use.
periods of non-use.
Position the camera, monitor and AC adapters to allow
adequate ventilation.
adequate ventilation.
Keep the camera out of direct sunlight.
To prevent overheating, keep the camera, monitor and AC
adapters away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers)
which produce heat.
adapters away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers)
which produce heat.
Use only the AC adapters provided. Use of any others may
damage the camera and/or monitor.
damage the camera and/or monitor.
R
Plug into an electrical outlet with standard household power
(120 volt AC outlet).
(120 volt AC outlet).
Changes or modifications not approved by RadioShack void
the manufacturer’s warranty and could void user's authority
to operate the equipment.
the manufacturer’s warranty and could void user's authority
to operate the equipment.
+056#..+0)"6*'"$#66'4+'5
Both camera and monitor are battery powered so they can
work during a power failure. To activate the battery power,
you must disconnect the AC adapters from both the camera
and monitor. For optimum performance, we recommend
alkaline batteries (available at your local RadioShack store).
The battery power lasts eight hours for the camera and 2.5
hours for the monitor.
work during a power failure. To activate the battery power,
you must disconnect the AC adapters from both the camera
and monitor. For optimum performance, we recommend
alkaline batteries (available at your local RadioShack store).
The battery power lasts eight hours for the camera and 2.5
hours for the monitor.
±
2#%-#)'"
%106'065
Please check that you have these
components before installation.
components before installation.
•
A camera with built-in
transmitter
transmitter
•
A monitor with built-in receiver
•
A 9V AC adapter (for camera
only)
only)
•
A larger 13.5V AC adapter (for
monitor only)
monitor only)
The lightning symbol is intended to alert you to
the presence of uninsulated dangerous voltage
within this product’s enclosure that might be of
sufficient magnitude to constitute a risk of
electric shock. Do not open the product’s case.
the presence of uninsulated dangerous voltage
within this product’s enclosure that might be of
sufficient magnitude to constitute a risk of
electric shock. Do not open the product’s case.
The exclamation symbol is intended to inform
you that important operating and maintenance
instructions are included in the literature
accompanying this product.
you that important operating and maintenance
instructions are included in the literature
accompanying this product.
!
WARNING:
To reduce the risk of fire or shock
hazard, do not expose this product to rain or
moisture.
moisture.
..
CAUTION
..
CAUTION:
TO REDUCE THE
RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER OR BACK. NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
R
"9#40+0)"
R
Two AC adapters are included
with the Wireless Surveillance
System. The AC adapters can not
be interchanged. Use the adapter
labeled OUTPUT: 9V DC for the
camera. Use the larger adapter
labeled OUTPUT: 13.5V DC for
the monitor.
with the Wireless Surveillance
System. The AC adapters can not
be interchanged. Use the adapter
labeled OUTPUT: 9V DC for the
camera. Use the larger adapter
labeled OUTPUT: 13.5V DC for
the monitor.
±
"016'"
±
"
When the baby monitor’s sound
weakens or the picture becomes
unsteady while operating with
batteries, replace the batteries.
weakens or the picture becomes
unsteady while operating with
batteries, replace the batteries.