Radio Shack 9" COLOR TV/VCR COMBO 36 用户手册

11

Before using your Model 36 for the first time,
read through this entire section to determine
which connections best meet your needs. Then
follow the directions for completing the connec-
tions.

• You can connect many different types of

audio/video systems such as a stereo
receiver/amplifier, a satellite receiver, or a
combination of a cable system and outside
antenna to your Model 36. These connec-
tions might require additional supplies that
are available from your local RadioShack
store.

• Disconnect power from the Model 36 when

making connections. Do not connect the
Model 36’s power cord (AC or DC) until you
complete all other connections.

Choose a location for your Model 36 where:

• air flows freely on all sides of the Model 36

• the power cord (AC or DC) is not in the way

of normal traffic

Follow these steps to connect the supplied an-
tenna.

1. Insert the antenna’s post into the socket on

top of the Model 36’s cabinet.

2. Connect both sides of the antenna’s cable

to the supplied 300-to-75-ohm matching
transformer.

3. Plug the 300-to-75-ohm matching trans-

former into the Model 36’s 

terminal.

4. Fully extend the antenna and adjust it for

the best VHF reception.

Note:  To improve UHF reception, shorten the
antenna.

AC 120V

DC13.2V

ANT.

ANT.

16-429.fm  Page 11  Tuesday, July 20, 1999  3:50 PM