Proxim AP-4000 用户手册
Advanced Configuration
AP-4000 Series User Guide
Filtering
84
4. Set the destination Port Number (a value between 1 and 65535) to filter. See the IANA Web site at
for a list of assigned port numbers and their descriptions.
5. Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).
6. Set the Interface to filter:
6. Set the Interface to filter:
•
Ethernet
•
Wireless Slot A
•
Ethernet and Wireless Slot A
•
Wireless Slot B
•
Ethernet and Wireless Slot B
•
Wireless Slot A and B
•
All interfaces
7. Click OK.
Editing TCP/UDP Port Filters
1. Click Edit under the TCP/UDP Port Filter Table heading.
2. Make any changes to the Protocol Name or Port Number for a specific entry, if necessary.
3. In the row that defines the port, set the Status to Enable, Disable, or Delete, as appropriate.
4. Select OK
2. Make any changes to the Protocol Name or Port Number for a specific entry, if necessary.
3. In the row that defines the port, set the Status to Enable, Disable, or Delete, as appropriate.
4. Select OK
.