Procom CGA7740N 用户手册

Configuring the Wireless ADSL Modem Router

18

Address of your server, such as a web server, and then click on the port 
option HTTP Port 80 so users can access your web server from the 
Internet connection.

This DNS feature is powered by a DDNS service provider. With a 
DDNS connection you can host your own web site, email server, FTP 
site, and more at your own location even if you have a dynamic IP 
address. (Default : Disable)

4.10 Routing
These pages define routing related parameters, including static routes 
and RIP (Routing Information Protocol) parameters.

1- Click "Add" to add a new static route to the list
2- Click "SAVE SETTINGS" to save the configuration

RIP sends routing-update messages at regular intervals and when the 
network topology changes. When a router receives a routing update 
that includes changes to an entry, it updates its routing table to reflect 
the new route. RIP routers maintain only the best route to a destination.

After updating its routing table, the router immediately begins 
transmitting routing updates to inform other network routers of the 
change.

Make sure that you have a working ADSL subscription and that the 
ADSL Wireless Base Station is connected to the ADSL phone line. You 
can verify that the cable is connected correctly by looking at the ADSL 
light on the top of the ADSL Wireless Base Station. The ADSL light 
should be on solid after approximately 1 minute.

In step 2 you can change the Wireless settings of the ADSL Wireless 
Base Station. For easy installation it is advised to keep the default 
settings. If you later would like to change any of the wireless settings you 
can do so via the menu in the ADSL Wireless Base Station.