Polycom TM300 用户手册

下载
页码 15
VoiceStation™ 300 - 8
Maintenance
Troubleshooting
Clean the VoiceStation™ 300 with a soft, dry cloth.  
Do not use alcohol- or petroleum-based cleaners.
Muffled or “In a Well” 
Reception
► Speak closer to the phone so that 
the microphones pick up your 
speech more accurately.
► Add more sound absorbency to the 
room.
Excessive Noise
► Noisy equipment such as a com-
puter or fan may make it difficult to 
hear the other party.  Both parties 
should turn off noisy equipment.
► Try calling again to see if a differ-
ent line provides a better connec-
tion.
Physical Damage
► If physical damage is severe 
enough that the internal parts 
become visible, disconnect the 
VoiceStation™ 300 immediately.  
► Do not reconnect to the network 
until the VoiceStation™ 300 has 
been repaired.
No Dial Tone
► Check that all connections are cor-
rect and tight.
► Make sure the short cable is con-
nected to a standard analog phone 
line.
► Try a different telephone line.
Phone Does Not Ring
► Adjust the Ringer with the Volume 
up button.
Short Silences, Echoes, or 
Clipped Speech
► Do not move VoiceStation™ 300 
while it is in use.
► Keep your hands away from the 
phone during calls.
► Keep papers, cups, coffee pots, and 
other objects away from the phone.
► At the beginning of a call, allow 
each speaker present to speak in 
turn for a few moments to enable 
the phone’s electronics to adjust to 
the acoustic environment.
► The other party may be using low 
quality equipment or a half-duplex 
conference bridge, in which case 
there is no solution.