Pioneer PLASMA DISPLAY 用户手册

En

The OSD window is displayed with respect to the
screen as shown on the diagram.

* Depending on the screen’s mode, the OSD may be

displayed differently.
In the explanation, the OSD section is shown close up.

The following describes how to use the menus and the
selected items.
1. Press the MENU/SET button on the remote control to

display the MAIN MENU.

2. Press the cursor buttons 

▲ ▼ on the remote control to

highlight the menu you wish to enter.

3. Press the MENU/SET button on the remote control to

select a sub menu or item.

4. Adjust the level or change the setting of the selected item

by using the cursor buttons 



  



 on the remote control.

5. The adjustments or the settings that are stored in memory.

The change is stored until you change it again.

6. Repeat steps 2 – 5 to adjust an additional item, or press

the EXIT button on the remote control to return to the
main menu.

* When adjusting using the bar at the bottom of the screen,

press the 



 or 



 button within 5 seconds. If not, the

current setting is set and the previous screen appears.

Information
 Advanced menu mode
When “ADVANCED OSD” is set to “ON” in the main
menu (1/2), full menu items will be shown.

The menu display can be set to one of seven languages.

Example: Setting the menu display to “DEUTSCH”

On “MAIN MENU”, select “LANGUAGE”, then press the
MENU/SET button.
The “LANGUAGE” screen appears.
On  “LANGUAGE”, select “ DEUTSCH”, then press the
MENU/SET button.

The “LANGUAGE” is set to “DEUTSCH” and return to the
main menu.

Information
 Language settings
ENGLISH ........ English
DEUTSCH ....... German
FRANÇAIS ......  French
ESPAÑOL ....... Spanish

ITALIANO ........ Italian
SVENSKA ....... Swedish

У ............ Russian