Pioneer PLASMA DISPLAY 用户手册

En

The contrast, brightness, sharpness, color and tint can be
adjusted as desired.

Example: Adjusting the contrast

On “CONTRAST” of “PICTURE” menu, adjust the contrast.

Information
 Picture adjustment screen
CONTRAST: Changes the picture’s white level.
BRIGHTNESS: Changes the picture’s black level.
SHARPNESS: Changes the picture’s sharpness.
Adjusts picture detail of VIDEO display.
COLOR: Changes the color density.
TINT: Changes the picture’s tint. Adjust for natural
colored skin, background, etc.
 Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
 Restoring the factory default settings
Select  “DEFAULT” under the “AV SELECTION”
settings.

There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.

Example: Setting the “MOVIE 1” mode

On  “AV SELECTION” of “PICTURE” menu, select
“MOVIE 1”.

Information
 Types of AV SELECTIONS
MOVIE 1, 2: Set this mode when watching video in a
dark room.
This mode provides darker, finer pictures, like the
screen in movie theaters.
For a darker image, select MOVIE 2.
STD: Set this mode when watching video in a bright room.
This mode provides pictures with distinct differences
between light and dark sections.
DYNAMIC: This mode provides brighter pictures than
STD.
DEFAULT: Use this to reset the picture to the factory
default settings.

Use these settings if the picture has noise due to poor
reception or when playing video tapes on which the picture
quality is poor.

Example: Setting “HIGH”

On “DNR” of “PICTURE” menu, select “HIGH”.

Information
 DNR
* “DNR” stands for Digital Noise Reduction.
* This function reduces noise in the picture.
 Types of noise reduction
There are three types of noise reduction. Each has a
different level of noise reduction.
The effect increases stronger in the order of LOW, MID
and High.
OFF: Turns the noise reduction function off.

Use this procedure to set color tone produced by the plasma
display.

Example: Setting “HIGH”

On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.

Information
 Setting the color temperature
LOW: Redder
MID LOW: Slightly red
MID: Standard (slightly bluer)
HIGH: Bluer