Pioneer Server ML310 用户手册

Component identification  56 

3 

Fault status 

On = Drive failure 

Flashing = Fault-process activity 

Off = No fault-process activity 

 

 

Hot-plug SCSI hard drive LED combinations 

    

On, off, or 
flashing 

On or off 

Flashing 

A predictive failure alert has been received for this drive. 

Replace the drive as soon as possible.  

On, off, or 
flashing 

On 

Off 

The drive is online and is configured as part of an array. 

If the array is configured for fault tolerance and all other drives in the 
array are online, and a predictive failure alert is received or a drive 
capacity upgrade is in progress, you may replace the drive online. 

On or 
flashing 

Flashing Off 

The drive is rebuilding or undergoing capacity expansion.

 

On Off Off Do not remove the drive. 

The drive is being accessed, but (1) it is not configured as part of an 
array; (2) it is a replacement drive and rebuild has not yet started; or 
(3) it is spinning up during the POST sequence. 

Flashing Flashing Flashing Do not remove the drive. Removing a drive may cause 

data loss in non-fault-tolerant configurations. 

One or more of the following conditions may exist: 

•

 

The drive is part of an array being selected by an array 
configuration utility 

•

 

Drive Identification has been selected in HP SIM 

•

 

The drive firmware is being updated 

Off Off On The drive has been placed offline due to hard disk drive failure or 

subsystem communication failure. 

You may need to replace the drive. 

Off 

Off 

Off 

One or more of the following conditions may exist: 

•

 

The drive is not configured as part of an array 

•

 

The drive is configured as part of an array, but it is a 
replacement drive that is not being accessed or being rebuilt yet 

•

 

The drive is configured as an online spare 

If the drive is connected to an array controller, you may replace the 
drive online.