Patton electronic 07M6070-UM 用户手册
Storing
22
NanoServ™ User Manual
5 • Taking Care Of Your NanoServ™
Storing
•
Do not place your NanoServ™ in a location that is subject to:
-
Heating sources, such as a stove, oven, heater, radiator or air duct
-
Direct contact from sunlight
-
Rain or moisure
-
Excessive dust accumulation
-
High humidity
-
Constant or occasional mechanical movement, vibration or shock
-
Strong magnets, magnetic fields or magnetically unshielded speakers
-
Ambient temperature of more than 95ºF (35ºC) or less than 32ºF (0ºC)
•
Do not place other electronic devices or electronic equipment near your NanoServ™.
The electromagnetic field of the NanoServ™ may cause interference subjecting the unit to malfunction.
-
Provide adequate air ventilation (circulation) to prevent internal buildup of heat. Do not place your
NanoServ™ near the wall, behind the curtains or draperies, or in between two books that block its venti-
lation slots.
NanoServ™ near the wall, behind the curtains or draperies, or in between two books that block its venti-
lation slots.
-
Leave a space of at least 8 inches (20cm) around the sides and the back panel of the NanoServ™.
•
Change of environmental temperature:
Problems may occur when there is a sudden change of
environmental temperature. If the NanoServ™ is brought directly from a cold location to a warm one,
moisture may condense inside the unit. Allow time for the system to reach normal temperature before use.
moisture may condense inside the unit. Allow time for the system to reach normal temperature before use.
•
Checking the surrounding appliance(s) before using your NanoServ™:
Because the
NanoServ™ uses a high-frequency radio signal, it may interfere with radio or TV reception causing inter-
ference or poor signal display. When this happens, move the NanoServ™ to a suitable distance away from
the set.
ference or poor signal display. When this happens, move the NanoServ™ to a suitable distance away from
the set.
•
Do not drop the NanoServ™ from the working table or place heavy objects on top of
the NanoServ™.
the NanoServ™.