Paradyne Broadband Access Concentrator 8820 用户手册
1. Network Management Specification
8000-A2-GB30-00
June 2003
77
7.7.4.5.3
snmpTargetParmsTable:
It is used to configure target parameters (message processing level, security model, etc.) that
will be used in the generation of SNMP notification messages. This table will be supported
read-only with default entries as indicated in section 7.7.4.6.4 and 7.7.4.6.5
will be used in the generation of SNMP notification messages. This table will be supported
read-only with default entries as indicated in section 7.7.4.6.4 and 7.7.4.6.5
7.7.4.5.4
snmpUnavailableContexts and snmpUnknownContexts:
Statistics.
These tables will be stored in nonvolatile memory.
7.7.4.6
SNMP-NOTIFICATION-MIB (RFC 3413)
This MIB allows the GranDSLAM 3.0 agent to configure notification recipients. The MIB
is composed of the following tables:
is composed of the following tables:
7.7.4.6.1
snmpNotifyTable:
It contains entries that allow the GranDSLAM 3.0 to select the target entry in the
snmpTargetAddrTable that should be used when generating notification. Confirmed
(NOTIFY) and Unconfirmed notifications will be supported without encryption of the data.
snmpTargetAddrTable that should be used when generating notification. Confirmed
(NOTIFY) and Unconfirmed notifications will be supported without encryption of the data.
7.7.4.6.2
snmpNotifyFilterTable:
It contains filter profiles. Filter profiles are used to determine whether particular
management targets should receive certain notifications. This filtering feature will not be
supported.
management targets should receive certain notifications. This filtering feature will not be
supported.
7.7.4.6.3
snmpNotifyFilterProfileTable:
Filtering of traps will not be supported.
7.7.4.6.4
SNMPv1 traps - Default values:
By default, the GranDSLAM 3.0 agent will generate SNMPv1 traps. The notification
message will not be privatelly protected (no encryption). There will be a corresponding
entry in the snmpTargetParamsTable to be used when generating SNMPv1 traps. This entry
will have the following default values that can not be removed from the table:
message will not be privatelly protected (no encryption). There will be a corresponding
entry in the snmpTargetParamsTable to be used when generating SNMPv1 traps. This entry
will have the following default values that can not be removed from the table:
snmpTargetParamsName=’defaultV1traps’,
snmpTargetParamsMPModel=‘SNMPv1 (0)’,
snmpTargetParamsSecurityModel=’SNMPV1 (1)’,
snmpTargetParamsSecurityLevel=‘noAuthNoPriv (1).
7.7.4.6.5
SNMPv2 traps - Default values:
Similarly, ‘defaultV2traps’ will be defined to be used when generating SNMPv2 traps.
The following default values will be associated to SNMPv2 traps:
snmpTargetParamsName=’defaultV2traps’,
snmpTargetParamsMPModel=‘SNMPv2 (1)’,
snmpTargetParamsSecurityModel=’SNMPV1 (1)’,
snmpTargetParamsSecurityLevel=‘noAuthNoPriv (1).
The trap version can be selected by specifying the desire choice (defaultV1traps,
defaultV2traps) in the snmpTargetAddrParams object of the trap manager configuration
(snmpTargetAddrTable).
defaultV2traps) in the snmpTargetAddrParams object of the trap manager configuration
(snmpTargetAddrTable).