Paradyne Broadband Access Concentrator 8820 用户手册
1. Network Management Specification
84
June 2003
8000-A2-GB30-00
disable(1) - Tests will not be terminated based on a timer and
enable(2) - Tests will be terminated after the duration specified by devConfigTestDuration.
This object specifies whether tests are to be terminated after a defined duration. If the value
is enable(2), the duration is defined by devConfigTestDuration.
is enable(2), the duration is defined by devConfigTestDuration.
8.2.2
devConfigTestDuration
This object specifies the duration (in seconds) that a test will be allowed to run before it is
automatically terminated. The range of possible values are 0-7200 seconds with increament
of 60 Sec. The default value is 600 Seconds (10 Minutes). Tests will only be terminated if
devConfigTestTimeout is set to enable.
automatically terminated. The range of possible values are 0-7200 seconds with increament
of 60 Sec. The default value is 600 Seconds (10 Minutes). Tests will only be terminated if
devConfigTestTimeout is set to enable.
8.3
Paradyne Time Mib (pdn_time.mib)
The following objects are supported for GranDSLAM 3.0.
8.3.1
devDateAndTime (RW):
This objects displays the date and time on the entity. It allows an NMS to set the date and
time in the appropriate timezone.
time in the appropriate timezone.
8.3.2
devNTPServerIP (RW):
This Objects allows an NMS to configure theNTP server IP address.
8.3.3
devNTPMode (RW):
This object allows an NMS to configure the mode in which NTP/SNTP will operate. In
unicast(1) mode, NTP/SNTP polls the server specified via the devNTPServerIP object. In
broadcast(2) mode, NTP/SNTP polls by broadcasting a request so that any NTP/SNTP
server could respond. Alternatively, in broadcast(2) mode, the client only listens for
messages broadcasted by any server. In multicast(3) mode, the client listens for messages
from any server sent to the multicast group defined for NTP/SNTP (224.0.1.1). Default
value is multicast(3).
unicast(1) mode, NTP/SNTP polls the server specified via the devNTPServerIP object. In
broadcast(2) mode, NTP/SNTP polls by broadcasting a request so that any NTP/SNTP
server could respond. Alternatively, in broadcast(2) mode, the client only listens for
messages broadcasted by any server. In multicast(3) mode, the client listens for messages
from any server sent to the multicast group defined for NTP/SNTP (224.0.1.1). Default
value is multicast(3).
8.3.4
devNTPSynchronised (RW):
This object allows an NMS to configure the poll interval (hours) for the NTP/SNTP client
to use to send requests to an NTP/SNTP server to synchronize the local clock for the device.
Default value is 1 hour.
to use to send requests to an NTP/SNTP server to synchronize the local clock for the device.
Default value is 1 hour.
Table 1-92. pdn_time.mib
Object
Type
Access
Supported
devDateAndTime
DateAndTime
read-write
Yes
devNTPServerIP
IpAddress
read-write
Yes
devNTPMode
NTPMode
read-write
Yes
devNTPSynchronised
INTEGER
read-write
Yes
devNTPEnable
INTEGER
read-write
Yes
devNTPOffsetFromUTC
INTEGER
read-write
Yes