Panasonic DMC-FZ200 业主指南

- 141 -

Recording

Contrast and exposure will be adjusted automatically when there is a big difference in 
brightness between the background and subject, to bring the image close to how you see.

•

Even when the [Sensitivity] is set to [100], [Sensitivity] may be set higher than [100] if the picture is 
taken with [i.Dynamic] set to valid.

•

Compensation effect may not be achieved depending on the conditions.

•

[LOW], [STANDARD], or [HIGH] represents the maximum range of effect.

You can take a picture brightly in dark places by setting [Min. Shtr Speed] slower. Also, you can 
set it faster to reduce the blur of the subject.

¢

¢

(DMC-FZ60) 

¢ When [Sensitivity] is set to [2000], [2500], or [3200], the camera sets the shutter speed at [1/4].

•

This should usually be set to [AUTO] to take pictures. (When you select a minimum shutter speed 
other than [AUTO], [

] appears on the screen.)

•

When [AUTO] is selected, shutter speed may be set up to 1 second when there is not much jitter to 
adjust with the [Stabilizer], or when [Stabilizer] is set to [OFF].

•

Setting [Min. Shtr Speed]  to slower speed might increase the chance of jitter, so we recommend 
using a tripod and the Self-timer for taking pictures.

•

Setting [Min. Shtr Speed]  to faster speed might make the picture darker, so we recommend 
recording the picture in well-lit area. If correct exposure cannot be achieved, [

] will flash in red 

when the shutter button is pressed halfway.

Darker

Brighter

Less

More