TiVo Staple Gun Tivo Digital Video Recorders 用户手册

DVR #2 and cover the plastic window of DVR #1. Finally, go to the System Information 
screen of DVR #2, and press DOWN arrow until you see Remote Address displayed.

Move the DVR SWITCH to 2. Repeat steps 4 and 5, above. Assign the number “2” to DVR 
#2, then press the TiVo button to go to TiVo Central.

Now when you set the DVR SWITCH to 1, it will only control DVR #1—and when you set 
it to 2, it will only control DVR #2.

Move the DVR SWITCH to 1.

Press and hold the PAUSE and TiVo buttons simultaneously for about three seconds, until 
the red light at the end of the remote control comes on and remains steady. 

Using the number buttons on the remote control, enter 0 (zero). The red light at the end of 
the remote control will flash to indicate that the DVR SWITCH (either 1 or 2) is reset.

To complete the reset, move the DVR SWITCH to 2 and repeat steps 2 and 3.

By default, all DVRs and remote 

controls have a Remote Address 

of “0” (zero). A remote control with a 

Remote Address of “0” will control any 

DVR, even one with an assigned code. A 

DVR set to “0” will respond to any remote 

control, even one with an assigned code. 

This prevents you from becoming 

accidentally “locked out” of controlling 

your DVRs.