TANDBERG CODIAN 2200 用户手册

下载
页码 142
 
114 
Displaying hardware health status  
The Health Status displays information about the hardware components of the IP VCR. To access this information, go to 
Status > Health.
  
To reset these values, click 
Clear
. Refer to the table below for assistance in interpreting the information displayed.  
Field 
Field description 
Usage tips  
Fans Voltages 
RTC battery 
Displays two possible states:  
• 
OK  
• 
Out of spec 
States indicate both 
Current status
 and 
Worst status 
seen
 conditions.  
• 
OK
 – component is functioning properly  
• 
Out of spec
 – Check with your support 
provider; component might require 
service 
If the 
Worst status seen
 column displays "Out of 
spec", but 
Current status
 is "OK", monitor the 
status regularly to verify that it was only a 
temporary condition. 
Temperature 
Displays three possible states:  
• 
OK  
• 
Out of spec 
• 
Critical 
States indicate both 
Current status
 and 
Worst status 
seen
 conditions. 
• 
OK
 – temperature of the IP VCR is within 
the appropriate range  
• 
Out of spec
 – Check the ambient 
temperature (should be less than 34 
degrees Celsius) and verify that the air 
vents are not blocked  
• 
Critical
 – temperature of IP VCR is too 
high. An error also appears in the event 
log indicating that the system will 
shutdown in 60 seconds if the condition 
persists  
If the 
Worst status seen 
column displays "Out of 
spec", but 
Current status
 is "OK", monitor the 
status regularly to verify that it was only a 
temporary condition.