TANDBERG CODIAN 2200 用户手册

 

73 

Identifies an optional second name server. 

  

Specifies an optional suffix to add when performing 
DNS lookups. 

This can allow you to use non-fully qualified host 
names when referring to a device by host name 
instead of IP address. 

For example, if the domain name is set to 
codian.com, then a request to the name server to 
look up the IP address of host endpoint will actually 
lookup endpoint.codian.com. 

Use the IP Status fields to verify the current IP settings for the appropriate Ethernet port of the IP VCR, which were 
obtained using DHCP or configured manually (see 

) including:  

• 

Host name 

• 

DHCP 

• 

IP address 

• 

Subnet mask 

• 

Default gateway 

• 

Name server (DNS) 

• 

Secondary name server (DNS) 

• 

Domain name (DNS suffix) 

These settings determine the Ethernet settings for the appropriate port of the IP VCR. Refer to the table for assistance 
with these settings. When you have finished, you must press 

 to make the changes take 

effect. 

Specify whether you want this Ethernet port to 
automatically negotiate its Ethernet settings with 
the device it is connected to, or if it should use the 
values that you specify in the Manual configuration 
fields below. 

It is important that your Ethernet settings match 
those of the device to which this port is connected. 
For example, both devices must be configured to 
use automatic negotiation, or both configured with 
fixed and matching speed and duplex settings (see 
below). 

Identifies the connection speed: 10 Mbit/s or 100 
Mbit/s. Use automatic negotiation if a connection 
speed of 1000 Mbit/s is required.  

The connection speed must match that of the 
device to which this port is connected. 

You only need to select this option if you have 
chosen manual Ethernet settings, as described 
above.