TANDBERG DIRECTOR D5016402 用户手册

Appendix

TANDBERG Director Videoconferencing System

96

Appendix 1: Connecting to ISDN using network adapters

Connecting

When network terminating units are required, Inter-Tel Inc. models NT1 or NT384 are installed
within the enclosed area at the bottom of the cart, as illustrated below.

Connect the first ISDN cable from ISDN 1 on the codec to the S-interface on your first NT1 network
adapter. Connect the other ISDN cables to the appropriate NT1 network adapters.

Connect the U-interface of your NT1 adapter to the line provided from your network provider.
TANDBERG can provide NT-adapters.

For convenience the NT1 adapters could be placed inside the cabinet. If needed, use the shorter

ISDN cable (RJ45 connectors) delivered with the NT1 between the codec and the NT1 and the
longer ISDN cable between the NT1 and the connector (RJ45) at the wall socket.

Configuring

The configuration of the codec is performed in the same manner as described in ISDN BRI
Settings.

The NT1 should be powered up and you should check that the network is active. Please check
your NT1 User Manual.

ISDN

1
2
3
4
5
6

NT1

U     S/T

U-interface

S/T-interface

Wall

6000 Codec

NT1

U     S/T

NT1

U     S/T

NT1

U     S/T

NT- 384

(NT-1 triple)

NT1

U     S/T

NT1

U     S/T

NT- 384

(NT-1 triple)