TANDBERG CODIAN MCU 4500 用户手册
166
The MCU is able to generate Call Detail Records (CDR) which may be used for auditing and billing purposes. When
logging is enabled, records are generated whenever a conference starts or finishes, when participants join and leave
conferences and so forth.
logging is enabled, records are generated whenever a conference starts or finishes, when participants join and leave
conferences and so forth.
To use the CDR feature, there must be a 256 Mb compact flash card in the slot in the front of the unit. If there is no
compact flash card present, and you have enabled CDR logging, errors will be recorded in the Event log.
compact flash card present, and you have enabled CDR logging, errors will be recorded in the Event log.
When enabled, the CDR log is stored on the compact flash card and displayed on the
page. You can
either view the CDR log on that page, or you can download it as an XML file. You cannot read from the compact
flash card using any device other than the MCU.
flash card using any device other than the MCU.
When enabled, CDRs are flushed to the compact flash card every five minutes; when the card is full, the oldest logs
are overwritten.
are overwritten.
To view and control the CDR log, go to
and click the
tab. Refer to the tables below for details of the
options available and for a description of the information displayed.
The CDR log can contain a lot of information. The controls in this section will help you to select the information for
display that you find most useful. When you have finished making changes, press
display that you find most useful. When you have finished making changes, press
to make those
changes take effect. Refer to the table below for a description of the options:
This field indicates whether CDR logging is
enabled or disabled. Use the two buttons (
enabled or disabled. Use the two buttons (
and
) to change status.
When you enable logging, the MCU writes the
CDRs to the compact flash card.
CDRs to the compact flash card.
Enabling or disabling CDR logging has immediate
effect. There is no need to press
effect. There is no need to press
after pressing one of these buttons.
Ensure there is a compact flash card in the slot on
the front of the unit.
the front of the unit.
The current number of CDRs in the log.
Use this field to limit the scope of the displayed
Call Detail Records. The filter string is not case-
sensitive.
Call Detail Records. The filter string is not case-
sensitive.
The filter string applies to the Message field in the
log display. If a particular record has expanded
details, the filter string will apply to these as well.
log display. If a particular record has expanded
details, the filter string will apply to these as well.
By default, the CDR log shows only brief details
of each event. Select from the options listed to
display more details (when available).
of each event. Select from the options listed to
display more details (when available).
Selecting will show the greatest amount of
detail for all messages, regardless of which other
options are checked.
detail for all messages, regardless of which other
options are checked.