TANDBERG D13841.08 用户手册
D13841.08
10.2007
10.2007
35
TANDBERG
3G Gateway
USER GUIDE
TANDBERG
3G GATEWAY
USER GUIDE
IP Address Assignment
is DHCP or Static:
DHCP:
•
Dynamic Host Configuration
Protocol can be selected when a DHCP
server is present. Static IP Address, Static
IP Subnet Mask and Static IP Gateway are
ignored because these parameters are
assigned by the DHCP server.
server is present. Static IP Address, Static
IP Subnet Mask and Static IP Gateway are
ignored because these parameters are
assigned by the DHCP server.
Static:
•
If Static assignment is used, the 3G
Gateway’s IP address, IP subnet mask, and
the Gateway’s IP address must be specified
in the respective IP address fields.
the Gateway’s IP address must be specified
in the respective IP address fields.
Select
IP
from the
Configuration
to access the
IP Configuration
pane.
Save.
When ready to store
the new settings, press
Save
. These settings will
take effect when the system
has been restarted.
has been restarted.
DNS Interface
Up to five Domain Name
Server IP addresses can be
specified here. Your LAN
administrator will provide
the correct values for these
fields. By default these
fields are set to
Server IP addresses can be
specified here. Your LAN
administrator will provide
the correct values for these
fields. By default these
fields are set to
127.0.0.1
Date and Time Settings.
An
NTP server address can be
specified here to provide the
3G Gateway with up-to-date
time and date information.
specified here to provide the
3G Gateway with up-to-date
time and date information.
Restart.
This button will
restart the 3G Gateway.
Any changes made in the
IP Configuration of the 3G
Gateway will take effect
after the system has been
restarted.
Any changes made in the
IP Configuration of the 3G
Gateway will take effect
after the system has been
restarted.
IP Configuration
IP Ethernet Speed
provides five settings to
choose from:
Auto
•
The Gateway will negotiate detect the
speed and duplex on the LAN.
10Half
•
The Gateway will connect to the
LAN using 10 Mbps/Half Duplex.
10Full
•
The Gateway will connect to the LAN
using 10 Mbps/Full Duplex.
100Half
•
The Gateway will connect to the
LAN using 100 Mbps/Half Duplex.
100Full
•
The Gateway will connect to the
LAN using 100 Mbps/Full Duplex.
IP Address
. The Static IP Address defines
the network address of the 3G Gateway. This
address is only used in static mode. Your LAN
administrator will provide you with the correct
address for this field.
address is only used in static mode. Your LAN
administrator will provide you with the correct
address for this field.
IP Subnet Mask
. The Static IP Subnet Mask
defines the type of network. Your LAN administrator
will provide the correct value for this field.
will provide the correct value for this field.
IP Gateway
. The Static Gateway IP address is
set to 127.0.0.1 by default. In case of a router
enter its address here. Your LAN administrator
will provide the correct value for this field.
enter its address here. Your LAN administrator
will provide the correct value for this field.