Management Protocol)
is used for monitoring
and configuring different
units in a network. The 3G
Gateway’s SNMP Agent
responds to requests from
SNMP Managers (a PC
program etc.). SNMP traps
are generated by the agent
to inform the manager about
important events.

SNMP Mode.

The SNMP operation modus can

be set to:

•

. Turns SNMP On

Off

•

. Turns SNMP Off

ReadOnly

•

. Do not send SNMP information

to the host

TrapsOnly

•

. Only send SNMP information

identified as TRAPS to the host.

SNMP Community name.

SNMP Community

names are used to authenticate SNMP
requests. SNMP requests must have this
‘password’ in order to receive a response from
the SNMP agent in the 3G Gateway.

System contact.

Used to identify the system

contact via SNMP tools such as HPOpenView
or TANDBERG Management Suite.

SNMP Configuration

Host IP Address

(

and

). Identifies the

IP-address of the SNMP manager. Up to three
different SNMP Trap Hosts can be defined.
Your LAN administrator should provide the
correct values for these fields.