Talkswitch M600I 用户手册

4. Activate the card by setting the Calling 

Card Mode to 

, 

 or 

.

The calling card icon 

 will now be visible 

in the status bar. The .pbx file may be set up so 
that you can send commands to the 
switchboard by tapping the calling card icon.

You can choose if you want the phone to alert 
you when you receive an incoming call during 
an ongoing call.

Select 

 and set this option to 

/

.

If ALS (two lines on the SIM card) is 
available, you can set this option to 

on 

two separate voice lines.

The settings are made in the network. Select 

 

 to receive the current settings. 

The phone can divert incoming calls (voice 
and data & fax calls) to another number if you 
are busy, not reachable or do not reply. You 
can also choose to divert all calls.

Select 

 and choose which type of calls 

that should be diverted and then where to 
divert them.

Divert options

 – select an entry from 

the Contacts phonebook.

 – enter a phone number to 

be used for diverting calls.

 – your incoming calls will not be 

diverted.

All the divert settings are made in the network. 
Select 

 

 to receive the current 

settings.

Select 

to enable the feature. If the feature is 

enabled and you reject a call, you will be asked 
to set up a reminder to follow it up after a pre-
defined delay that you can choose.

Select 

to set how to answer to an 

incoming call when handsfree equipment is 
connected.

Answering mode

 – answer calls as normal.

 – press any key on the keyboard 

to answer.