Over And Back PAP2 用户手册

Phone Adapter with 2 Ports for Voice-over-IP

11

Check DHCP

Use this command to find out if DHCP 
has been enabled or disabled. If 
enabled, the Phone Adapter will be 
automatically assigned an IP address 
by your network router or gateway. If 
disabled, then the Phone Adapter will 
use a static IP address.

Enable/Disable DHCP

Enter 1 to enable
Enter 0 to disable

Enable or disable the Phone Adapter’s 
DHCP feature. If your network router 
or gateway assigns IP addresses, then 
enter 1. Otherwise, enter 0.

Check IP Address

You will hear the current IP address of 
the Phone Adapter.