Orbit Manufacturing ORBIT 2000 用户手册
Page 8 - 8
Maintenance
© GBC Films Group January 2001
Orbit™ 2000 Operation and Maintenance Manual
4/
W A R N I N G
W A R N I N G : A l w a y s e x e r c i s e L o c k o u t / T a g o u t p r o c e d u r e s w h e n p e r f o r m i n g a n y
type of maintenance to avoid injury to yourself, others and to the equipment.
a/
Raise the snapping section safety shield.
b/
Remove the lock down thumb screw.
c/
With a #3 flat tip screwdriver, remove the four flat head shoulder bolts securing the twin knife
safety cover.
d/
Replace the lock down thumb screw. This will prevent the twin knife assembly from sliding.
e/
Use a 4 mm allen wrench to remove the two hex bolts securing the blade you are replacing.
f/
Replace the knife.
g/
Secure the knife reusing the same bolts and a 4 mm allen wrench.
h/
Remove the lock down thumb screw.
i/
Replace the twin knife safety cover and secure in place using the same flat head shoulder bolts and
a #3 flat tip screwdriver.
j/
Replace the lock down thumb screw.