Optibase MGW 2400 WMT 用户手册

Chapter 2 

• Initial Configuration 

1.  Enter the new IP address

 and 

Subnet mask for the relevant 

NIC and press Enter. Make sure that each NIC’s IP 
address belongs to a different subnet. 

2.  To make MGW 2400 accessible from outside your local 

network for the relevant NIC, define the Default Gateway 
server's IP address and press Enter. 

3.  If you do not want MGW 2400 to be accessible from 

outside your local network via the relevant NIC, type 0 for 
Default Gateway and press Enter; the new parameters for 
the relevant NIC are defined and MGW 2400 returns to the 
Network menu. 

4.  To register MGW 2400 in the WINS data base, enter the 

WINS server's IP address and press Enter. If you do not 
want to define a WINS server or no WINS server exists in 
your network, type 0 and press Enter.  

 

Make sure that you do not press Enter without typing any 
value as this could cause MGW 2400 to fail.