Optibase MGW 2400 WMT 用户手册

Chapter 3 

• Accessing MGW 2400 

3.  From the Privileges list, choose the desired user profile. 

4.  Enter the user name and password for the desired user and 

click OK 

; the MGW 2400 EMS Main window 

appears with the Modules page open. The IP address of the 
unit appears in the Status bar to the left and the current user 
level to the right. 

•  For required passwords, refer to page 104. 

•  The blue arrow to the upper right 

 and the 

green LED in the Status bar indicate that MGW 2400 
is responding properly. 

If the arrow is broken and turned red 

; you cannot use 

Re-Login. In this case, first close MGW 2400 EMS and then 
log on to a different unit. 

1.  On MGW 2400 EMS's toolbar, click Re-Login 

; 

the Login window appears. 

2.  In the Device IP/Name field, enter the relevant MGW 2400 

unit's IP address. 

•  To log on to the same unit as a different user, leave 

the IP address as is and choose the desired user from 
the Privileges list. 

3.  Refer to the previous page for further information and 

instructions. 

If you try to log on as Administrator or Super User and there is 

already an Administrator or Super User logged on, MGW 2400 logs 

you on as Guest.