Optibase MGW 2400 WMT 用户手册

Chapter 3 

• Editing Channel Parameters 

Output NIC 

IP address of the NIC via which 
content transmits. 

No external WMS 
server. 
Choose the MGW 
2400 NIC that you use 
for transmission. 
External WMS 
server. 
Type the IP address 
of the external WMS 
server's NIC that you 
use for transmission. 

Target IP 
address 

Multicast IP addresses 
224.1.1.1 - 239.255.255.255 

Enter an IP address 
within the listed range. 
Make sure that the 
relevant receivers are 
set to the same 
Multicast IP address. 
Other Multicast IP 
addresses are 
reserved for certain 
tasks or devices and 
can cause network 
conflicts if used for 
different purposes. 

Port 

You may use ports between 1024 
and 20000. Do not use ports 
between 7008 and 7013. 

Make sure you set a 
unique port for each 
target you add. 

UDP Block Size  1024 - 20000 

(default is 0 for Automatic) 

We recommend 
setting the UDP Block 
Size value to 0 for 
Automatic. 
The UDP Block Size 
depends on the video 
and audio bit-rates. 
The values set by 
MGW 2400 can be 
found at page 113.