Omega Engineering Slow Cooker 48 用户手册

18

To edit a temperature, type in the required

temperature. In the example here, the

heated lid temperature is being edited.

Press “Enter” to accept.

Use the “Down Arrow” and/or the “Up

Arrow” keys to select the next field

or step you wish to edit.

To edit a field with on/off settings, first

select the field and press “Enter”

Use the “Up Arrow” and “Down Arrow”

keys to toggle between the

settings.

Press “Enter” to accept.

To edit a step with both a temperature and

a time, first press “Enter” and type in

the new temperature. Press “Enter”

again. Now type in the new time. The

default is minutes.

1. For whole minutes, type the number

required then “Enter”

2. To toggle between minutes and hours,

use the “Decimal Point” key.

3. For values less than 1 minute, first

press the “Decimal Point” key followed

by the number of seconds required.

4. For minutes and seconds, type the

number of minutes followed by the

“Decimal Point” key then the number

of seconds.

Once the values have been added, press

“Enter” to accept.

Once you have finished editing and you

are happy with the changes, press the

“End” key followed by the “Enter”

key to save.

If you press the “End” key a second

time for ‘No’ then all the changes you have

made will be lost.

---------------------
Fin extn

72.0

º

C 5m00

Fin hold 10.0ºC
[ , to edit ]
[ to save ]

---------------------
Fin extn

72.0

º

C 5m00

Fin hold 10.0ºC
[ , to edit ]
[ to save ]

---------------------

Post run

72.0

º

C 5m00

Post hold 10.0ºC

[ , to edit ]
[ to save ]

72.0

º

C 5m00

ºC

[ , to edit ]
[ to save ]