Omron SYSMAC C200HW-ZW3AT2-E-V2 用户手册

To create or edit routing tables, select the corresponding function from the Rout-
ing Table Menu.

Each function is described on the following pages. The Routing Table Menu is
displayed as follows:

1. Select “R: Routing table” from the Main Menu. The routing table (local net-

work table) will be displayed.

2. Press the F2 (Menu) Key. The Routing Table Menu will be displayed.

“E: Edit” is used to create or edit the routing tables: the local network table and
the relay network table.

1) “E: Edit” creates or edits routing tables in the computer memory. To actually

set the routing tables at a node, select “T: Transfer” from the Routing Table
Menu. Also, save the routing tables as a file by selecting “S: Save” from the
Routing Table Menu. The table data will be cleared when the Controller Link
Support Software is exited.

2) The Controller Link Support Software can create routing tables for only one

node at a time. If routing tables for more than one node are to be created,
save the created routing tables for a node, then create routing tables for the
next node.