Night & Day Corona Table 组装说明
Assembly Procedure
1
Assembly
Instructions
This instruction shows
Coffee Table assembly.
Procedure is the same
for both sizes.
i
End Table
Coffee Table
Assembled view
Parts in this box
2
3
Page 1 of 1
Check that all holes are free of
wood chips and sawdust.
wood chips and sawdust.
Helpful Tips: Fastening of Bolts
A screwdriver will help in aligning
the Barrel Nut hole with the Bolt.
the Barrel Nut hole with the Bolt.
Screw the Bolt in gently to avoid
stripping the threads.
stripping the threads.
1.
2.
3.
4.
Turn the Table Top upside down as shown on diagram.
Be sure that the Table Top is laying on a flat smooth surface.
Attach the Leg Frames to the Apron using the longer Bolts
Attach the Leg Frames to the Apron using the longer Bolts
and Barrel nuts. - LEAVE BOLTS VERY LOOSE!
Fix the Shelf Frame to the Leg Frame using the shorter
Fix the Shelf Frame to the Leg Frame using the shorter
Bolts. Nuts are already fixed inside the magazine shelf.
When all parts are assembled, gently tighten all the Bolts.
When all parts are assembled, gently tighten all the Bolts.
Finally lightly tap the Wood Buttons into the bolt holes.
CORONA TABLE
FUTON ACCESSORIES
N&D-0503
Leg Frame assembly
x 2 Pieces
x 2 Pieces
Table Top (Apron attached) x 1 Piece
Magazine Shelf x 1 Piece
60mm Bolts x 4 Pieces
Allen Key
x 1 Piece
x 1 Piece
Barrel Nuts
x 4 Pieces
x 4 Pieces
Wood Button
x 8 Pieces
x 8 Pieces
Hardware in this box
100mm Bolts x 4 Pieces
Leg Frame
Bolt
Barrel Nut
Table Top
Table Apron
Magazine shelf
Allen Key
Barrel Nut
Leg Frame
Bolt
Wood
Buttons
Bolt
Bolt
Bolt
Bolt
Wood
Buttons
Bolt
Bolt