Cirkuit Planet IPX-300 用户手册

¾

 

These are the IP settings of the LAN (Local Area Network) interface for the device. These settings may 

be referred to as "private settings". You may change the LAN IP address if needed. The LAN IP 

address is private to your internal network and cannot be seen on the Internet. The default IP address 

is 192.168.0.1 with a subnet mask of 255.255.255.0.   

 

LAN is a network of computers or other devices that are in relatively close range of each other. For 

example, devices in a home or office building would be considered part of a local area network. 

 

 

Figure 4-9. LAN settings 

 

Assign the IP address of LAN server, default is 

192.168.0.1 

Select a subnet mask from the pull-down menu, default is 

255.255.255.0 

Table 4-3. LAN description 

 

¾

 

A proxy server is a computer network service that allows clients to make indirect network connections 

to other network services. The default setting is Enable the DNS proxy server.   

 

Figure 4-10. DNS proxy settings 

 
 
DHCP 

DHCP stands for Dynamic Host Control Protocol. The DHCP server gives out IP addresses when a 

device is starting up and request an IP address to be logged on to the network. The device must be set 

as a DHCP client to "Obtain the IP address automatically". By default, the DHCP Server is enabled in 

the unit. The DHCP address pool contains the range of the IP address that will automatically be 

assigned to the clients on the network.   

 

DHCP client computers connected to the unit will have their information displayed in the DHCP Client 

List table. The table will show the Type, Host Name, IP Address, MAC Address, Description, and 

 

46