Ninja BL800 业主指南

En
g

lis

h

 IMPORTANT: Make sure that the motor base is 

plugged in for use.

1  Place the motor base on a clean, dry, level surface 

such as a counter or table top.

2  Add ingredients to the single serve cup.  

NOTE: Do not overfill! To avoid spilling, do not add 

ingredients past the “Max” fill line.

3  Place the single serve blade onto the cup and screw 

it on tightly until you have a good seal.  

(Fig. 9)

4  Turn the single serve cup upside down and place it 

onto the motor base, aligning the tabs on the cup 

with the motor base. (Fig. 10) Turn clockwise until 

the cup locks in place, the unit is ready for use. 

(Fig. 11)

5  Turn the Variable Speed Dial to the Single Serve 

icon. The single serve cup only operates at one 

speed regardless of which number is chosen on the 

dial. Press down on the “Start/Stop/Pulse” toggle 

in short intervals until you have reached your 

desired consistency. (Fig. 11)

For best results, use short “PULSES”... Practice makes perfect!!

6  When you have reached your desired consistency, 

turn the single serve cup counter-clockwise  

(Fig. 12) and pull straight up to remove. (Fig. 13) 

7  Turn the cup upright and remove the single serve 

blade by twisting the blade assembly counter 

clockwise.

8  Place the Sip & Seal

™

 To-Go drinking lid onto the 

single serve drink cup, screw on to seal and enjoy!

9  Make sure that the motor base is unplugged when 

not in use.