Nextel comm I700PLUS NTN9368-A 用户手册
18
www.nextel.com
12 characters, you can press P under “More” to see the remaining
characters. To return to the start of the number, press P under
“Numbr”.
characters. To return to the start of the number, press P under
“Numbr”.
You can store up to 100 names, phone numbers and Private IDs using
the following steps:
the following steps:
NOTE: To see the name with Caller ID, enter the caller’s 10-digit regu-
lar phone number (703-555-9999) in your phone list (see
“Caller ID” on page 35 ).
“Caller ID” on page 35 ).
1
Press * then # then 2 then 0.
2
The message: 20=Phone / Prvt List displays. Press P under
“OK”. Another message will display with the remaining number
of slots available. The phone will then display the Enter Name
screen.
“OK”. Another message will display with the remaining number
of slots available. The phone will then display the Enter Name
screen.
3
Enter the name of the individual you want to store.
(Notice, each key has a number and several letters. To select
different letters on a key, quickly press the key until the desired
letter displays. For example, to enter the letter Y you must press
different letters on a key, quickly press the key until the desired
letter displays. For example, to enter the letter Y you must press
9 3 times quickly. Also, you can press and hold # to
change the case of the letter you just entered (lower to uppercase
and upper to lowercase). The default style is uppercase.)
change the case of the letter you just entered (lower to uppercase
and upper to lowercase). The default style is uppercase.)
NOTE: Press the left side of
Q
to backspace or delete a
letter. Press the right side of the
Q
to insert a
space.
After you have entered the name, press P under “Store”.
4
Enter Phone Number displays. Enter the person’s area code
and phone number and press P under “Store”.
and phone number and press P under “Store”.
Remember to add plus and pause entries if desired. See “Pause
Digit Entry” on page 19 and “Plus Dialing” on page 28.
Digit Entry” on page 19 and “Plus Dialing” on page 28.
5
The name and Spd# = displays. The system automatically
assigns a Speed Dial number, which you can change by entering
a new number. Press P under “Store”.
assigns a Speed Dial number, which you can change by entering
a new number. Press P under “Store”.
6
Enter PrvtID displays. Enter the person’s Direct Connect
Private ID. Press P under “Store”.
Private ID. Press P under “Store”.
7
Repeat steps 2 through 6 to add additional names/numbers.
8
Press P under “Exit” when you have finished.
NextelUG_i700.fm Page 18 Friday, June 16, 2000 3:15 PM