NewAir Kegerator AK-200 用户手册

Also, See Illustrations E & F on pages 12 & 13, showing the hose connections to CO 

2

regulator and the regulator to the beer tap.

1.  Place the guardrail on top of the cabinet.

2.  Align all support feet of the guardrail with the holes on the top of the unit.

Follow these steps to safely install the CO  

2

regulator and CO  cylinder. You must read 

2

and  understand  the  following  procedures 
for the CO  cylinders before installation.

2

NOTE: Your CO  cylinder has DOT (USA

2

Department of Transportation) approval 
however  the  cylinder  has  been  shipped 
empty  to  avoid  any  possible  accidents 
during  transportation.  When  you  purchase 
the  first  keg  of  beer,  you  must  also  have 
your  CO   cylinder  filled  at  your  local 

2

supplier. (See page 4, item 9 for 
suggested locations within your  community.)

Install the CO  gas line tube to the regulator by attaching one end of the tube to 
the hose barb connection on the CO  regulator. (See Illustration B, on page 6)

Insert  the  special  washer  (provided  with  the  kit)  into  the  regulator  to  cylinder 
attachment nut. (See Illustration A, on page 6)

Attach the CO  regulator to the CO  cylinder by screwing the regulator nut onto 
the cylinder valve and tightening with an adjustable wrench.

Wrap the rubber strap that is attached to the interior of kegerator unit 
around the CO  bottle to secure the bottle in place (as shown above).

Position  the  cylinder  so  that  you  would  be  able  to  read  the  numbers  on  the 
gauges and have easy access to shut-off valves.

1.

2.

3.

4.

5.

Shut-Off
Valve

CO

2

Regulator

Co

2

Gas Line

Connect to
CO  Cylinder

2

Rubber
Washer

Rubber
Strap

CO

2

Cylinder

Co

2

7

;

2

2

2

2

2