NEC 2400 PX 用户手册
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
NDA-24297, Issue 1
Page 199
Call Forwarding-Intercept / Announcement
C-25
FCCS Programming (cont’d)
1 = Connection is held until the station is released. See the requirements of the application for
the announcement equipment. For Dead level applications, assign data “0”.
the announcement equipment. For Dead level applications, assign data “0”.
R:
Sending RBT
0/1 = Yes/No
A:
Answer Signal Sending (Answer from the incoming trunk)
0 = No/Yes Normally assign data “1”.
M:
Multiple Connection
0/1 = Single Connection/Multiple Connection
LGRT: Logical Route Number
TK:
TK:
Trunk Number
*Not necessary for “M = 1”
STEP 3:
ARRCN
- This data must be assigned to the NCN.
Release the restriction between the terminating trunk and the announcement trunk.
STEP 4:
ARSCN
- This data must be assigned to the NCN.
Release the restriction between the announcement trunk and the station.
Note:
The current command data shown is set to all nodes using the service: ASTD, ARTD, ATRK, MBTK