NEC EXPRESS 5800 用户手册
Upgrading Your System 7-17
DIMM
Install the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the system
board in the server. The system board is provided with six DIMM board slots.
board in the server. The system board is provided with six DIMM board slots.
NOTE:
Up to 6GB of memory (1GB DIMM x 6) can be installed. (The
DIMMs installed as standard need to be replaced in this case.) A DIMM
of 128MB is installed in DIMM slots #1A and #1B at shipment.
of 128MB is installed in DIMM slots #1A and #1B at shipment.
IMPORTANT:
!
The DIMM is extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity from
your body before handling the DIMM. Do not touch the DIMM
terminals or on-board parts by a bare hand or place the DIMM directly
on the desk. For static notes, see the section "Anti-static Measures"
described earlier.
touch the metal frame of the server to discharge static electricity from
your body before handling the DIMM. Do not touch the DIMM
terminals or on-board parts by a bare hand or place the DIMM directly
on the desk. For static notes, see the section "Anti-static Measures"
described earlier.
!
Make sure to use the DIMM authorized by NEC. Installing a third-
party DIMM may cause a failure of the DIMM as well as the server.
Repair of the server due to failures or damage resulted from installing
such a board will be charged.
party DIMM may cause a failure of the DIMM as well as the server.
Repair of the server due to failures or damage resulted from installing
such a board will be charged.