National Instruments Welding System FP-AI-112 用户手册

To install the FP-AI-112, refer to Figure 1 and complete the 
following steps:

1. Slide the terminal base key to either position X (used for any 

module) or position 1 (used for the FP-AI-112).

2. Align the FP-AI-112 alignment slots with the guide rails on the 

terminal base.

3. Press firmly to seat the FP-AI-112 on the terminal base. When 

the FP-AI-112 is firmly seated, the latch on the terminal base 
locks it into place.

 

Figure 1.  Installing the FP-AI-112

The cFP-AI-112 mounts on a Compact FieldPoint backplane 
(cFP-BP-x), which provides operating power to the module. 
Installing the cFP-AI-112 onto a powered backplane does not 
disrupt the operation of the FieldPoint bank.

To install the cFP-AI-112, refer to Figure 2 and complete the 
following steps:

1. Align the captive screws on the cFP-AI-112 with the holes on 

the backplane. The alignment keys on the cFP-AI-112 prevent 
backward insertion.

2. Press firmly to seat the cFP-AI-112 on the backplane.

1

I/O Module

2

Terminal Base

3

Alignment Slot

4

Key

5

Latch

6

Guide Rails

1

3

2

4

5

6